Category Archives: Our Products

  • 0

Live Low Voltage Phase Identification System

Category : Our Products

The “Live Trace” live low voltage phase identification system is used for positively identifying phase conductors of low voltage distribution systems. The transmitter unit is placed at a point of known phasing on the low voltage area, and one of the receivers is used to identify the phase connection of houses or streetlights connected to the low voltage distribution area.

Open case Phase I.D. Transmitter shown with Leads and Clips.
Picture of a closed case Phase I.D. Transmitter showing its hook and rope.
Closed case Phase I.D. Transmitter showing its hook and rope.

The transmitter unit (pictured above), is connected at a point of known phasing on the LV distribution network. It is fitted with a hanging bracket and lanyard for pole top use. It is manufactured in a weatherproof enclosure to ensure it is not damaged in the event of inclement weather during use. It is supplied with quality, European made test leads.

The non-contact receiver (pictured below) is used to identify which phase a house, streetlight or other equipment is connected to. It can be used simply by placing the head of the receiver near a conductor. It is able to detect phasing at a domestic switchboard without removing panels, allowing for fast and safe phase identification.

Picture of a Phase I.D. Non Contact Receiver Wand shown with a black hard cover case
Phase I.D. Non Contact Receiver shown with hard cover case
Picture of a Phase I.D. Non Contact Receiver wand showing switch and lights on its underside
Phase I.D. Non Contact Receiver showing switch and lights

  • 0

Contact Receiver

Category : Our Products

The contact phase identification receiver is designed for use in 3 phase switchboards, and similar areas where there is not enough physical separation to identify conductors using the non-contact receiver. Simply place the active and neutral probes on phase and neutral respectively, and the LCD will display the phase to which the receiver is connected.

Picture of a Closed Case Phase I.D. Contact Receiver
Closed Case Phase I.D. Contact Receiver
Picture of a Phase Identification Unit Opened with Leads
Open Case Phase I.D. Contact Receiver with Leads